IFIP TC6 Open Digital Library

APMS 2012: Rhodes, Greece

Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Revised Selected Papers, Part I

Christos Emmanouilidis, Marco Taisch, Dimitris Kiritsis

Springer, IFIP Advances in Information and Communication Technology 397, ISBN: 978-3-642-40351-4



Toward Energy Efficient Manufacturing: A Study on Practices and Viewpoint of the Industry.

Gökan May, Marco Taisch, Bojan Stahl, Vahid Sadr


Energy Efficient Production through a Modified-Green-PPC and a Communication Framework for the Energy Supply Chain to Manage Energy Consumption and Information.

Ulrich Brandenburg, Sebastian Kropp, Jorge Sunyer, Daniel Batalla-Navarro


Energy-Efficient Machining via Energy Data Integration.

Tao Peng, Xun Xu, Juhani Heilala


An ICT Supported Holistic Approach for Qualitative and Quantitative Energy Efficiency Evaluation in Manufacturing Company.

Hendro Wicaksono, Kiril Aleksandrov, Sven Rogalski, Jivka Ovtcharova


How Energy Recovery Can Reshape Storage Assignment in Automated Warehouses.

Antonella Meneghetti, Luca Monti


Modeling Green Fabs - A Queuing Theory Approach for Evaluating Energy Performance.

Hyun Woo Jeon, Vittaldas V. Prabhu


Analyzing Energy Consumption for Factory and Logistics Planning Processes.

Egon Müller, Hendrik Hopf, Manuela Krones


Energy Implications in the Single-Vendor Single-Buyer Integrated Production Inventory Model.

Simone Zanoni, Laura Bettoni, Christoph H. Glock


An Extended Energy Value Stream Approach Applied on the Electronics Industry.

Gerrit Bogdanski, Malte Schönemann, Sebastian Thiede, Stefan Andrew, Christoph Herrmann


An Approach for Energy Saving in the Compound Feed Production.

Marc Allan Redecker, Klaus-Dieter Thoben


Bridging the Gap between Energy Management Systems and Machine Tools - Embedded Energy Efficiency in Production Planning and Control.

Manuel Rippel, Olga Willner, Johannes Plehn, Paul Schönsleben


Energy Efficient Production Planning - A Joint Cognitive Systems Approach.

Connor Upton, Fergus Quilligan, Carlos García-Santiago, Asier González González


Using Internet of Things to Improve Eco-efficiency in Manufacturing: A Review on Available Knowledge and a Framework for IoT Adoption.

Giovanni Miragliotta, Fadi Shrouf


An Investigation into Minimising Total Energy Consumption, Total Energy Cost and Total Tardiness Based on a Rolling Blackout Policy in a Job Shop.

Ying Liu, Niels Lohse, Sanja Petrovic, Nabil Gindy


Requirements Analysis and Definition for Eco-factories: The Case of EMC2.

Marco Taisch, Bojan Stahl


Energy Efficient Process Planning System - The ENEPLAN Project.

Paolo Calefati, John Pandremenos, Apostolos Fysikopoulos, George Chryssolouris


Energy Efficiency Optimisation in Heat Treatment Process Design.

Iñigo Mendikoa, Mikel Sorli, Alberto Armijo, Laura Garcia, Luis Erausquin, Mario Insunza, Jon Bilbao, Hakan Fridén, Anders Björk, Linus Bergfors, Romualdas Skema, Robertas Alzbutas, Tomas Iesmantas


Evaluation and Calculation of Dynamics in Environmental Impact Assessment.

Björn Johansson, Jon Andersson, Erik Lindskog, Jonatan Berglund, Anders Skoogh


Discrete Part Manufacturing Energy Efficiency Improvements with Modelling and Simulation.

Juhani Heilala, Marja Paju, Jari Montonen, Reino Ruusu, Mikel Sorli, Alberto Armijo, Pablo Bermell-Garcia, Simon Astwood, Santiago Quintana-Amate


A Parallelizable Heuristic for Solving the Generic Materials and Operations Planning in a Supply Chain Network: A Case Study from the Automotive Industry.

Julien Maheut, José Pedro García-Sabater


Factory Modelling: Combining Energy Modelling for Buildings and Production Systems.

Peter D. Ball, Melanie Despeisse, Steve Evans, Rick M. Greenough, Steve B. Hope, Ruth Kerrigan, Andrew Levers, Peter Lunt, Vincent Murray, Mike R. Oates, Richard Quincey, Li Shao, Timothy Waltniel, Andrew J. Wright


Business Modelling for Sustainable Manufacturing.

Maria Holgado, Donatella Corti, Marco Macchi, Padmakshi Rana, Samuel W. Short, Steve Evans


Embedding Sustainability in Business Modelling through Multi-stakeholder Value Innovation.

Samuel W. Short, Padmakshi Rana, Nancy M. P. Bocken, Steve Evans


Toward Sustainability Governance in Manufacturing Networks.

Teuvo Uusitalo, Markku Reunanen, Katri Valkokari, Pasi Valkokari, Katariina Palomäki


Implementation of Sustainability in Ongoing Supply Chain Operations.

Liliyana Makarova Jørsfeldt, Peter Meulengracht Jensen, Brian Vejrum Wæhrens


Modular Framework for Reliable LCA-Based Indicators Supporting Supplier Selection within Complex Supply Chains.

Carlo Brondi, Rosanna Fornasiero, Manfredi Vale, Ludovico Vidali, Federico Brugnoli


Sustainable Food Supply Chains: Towards a Framework for Waste Identification.

Lukas Chabada, Heidi Carin Dreyer, Anita Romsdal, Daryl John Powell


A Classification of Industrial Symbiosis Networks: A Focus on Materials and Energy Recovery.

Vito Albino, Achille Claudio Garavelli, Vincenzo Alessio Romano


Performance Evaluation in Sustainability Conscious Manufacturing Companies by Using TOPSIS Method.

Merve Kiliç, Seren Özmehmet Tasan


A Decision-Aiding Approach for Residential PhotoVoltaic System Choice: An Application to the French Context.

Fredy Huaylla, Lamia Berrah, Vincent Cliville


Design of Controlling Supported Sustainability of Manufacturing Enterprises.

Eryk Glodzinski


Design, Manufacturing and Production Management

Modularization - Enabler for Shop Floor Involvement in Improvement and Development.

Bjørnar Henriksen, Lars Skjelstad, Eva Amdahl Seim, Carl Christian Røstad


Comparison of Criticality of Configuration Choices for Market Price and Product Cost.

Peter Nielsen, Thomas Ditlev Brunoe


The Multiple Faces of Mass Customization: Product Design, Process Design and Supply Chain Design.

Nico Vandaele, Catherine J. Decouttere


Development of a Business Process Matrix for Structuring the Implications of Using Configurators in an Engineer-To-Order Environment.

Olga Willner, Manuel Rippel, Matthias Wandfluh, Paul Schönsleben


Designing Rotationally Symmetric Products for Multi-variant Mass Production by Using Production-Technical Solution Space.

Guenther Schuh, Till Potente, Christina Thomas, Stephan Schmitz


Robotics in the Construction Industry: Mass Customization or Digital Crafting?

Ingrid Paoletti, Roberto Stefano Naboni


Simulation-Based Design of Production Networks for Manufacturing of Personalised Products.

Dimitris Mourtzis, Michalis Doukas, Foivos Psarommatis


An Empirical Based Proposal for Mass Customization Business Model in Footwear Industry.

Golboo Pourabdollahian, Donatella Corti, Chiara Galbusera, Julio Cesar Kostycz Silva


Mass Customized Large Scale Production System with Learning Curve Consideration.

Kuo Wei Chen, Richard Lee Storch


Event-Driven Order Rescheduling Model for Just-In-Sequence Deliveries to a Mixed-Model Assembly Line.

Georg Heinecke, Jonathan Köber, Raffaello Lepratti, Steffen Lamparter, Andreas Kunz


Support to Order Management and Collaborative Production of Customised Garments for Specific Target Groups.

Eva A. Coscia, Michele Sesana, Rosanna Fornasiero


Modeling and Simulation Tool for Sustainable MC Supply Chain Design and Assessment.

Paolo Pedrazzoli, Marino Alge, Andrea Bettoni, Luca Canetta


Agent Based Resources Allocation in Job Shop with Re-entrant Features: A Benchmarking Analysis.

Matteo Mario Savino, Antonio Mazza


Design of a Taxation System to Promote Electric Vehicles in Singapore.

Seng Tat Chua, Masaru Nakano


Knowledge Management in Set Based Lean Product Development Process.

Robert Furian, Frank von Lacroix, Dragan Stokic, Ana Correia, Cristina Grama, Stefan Faltus, Maksim Maksimovic, Karl-Heinrich Grote, Christiane Beyer


Design of Fundamental Ontology for Manufacturing Product Lifecycle Applications.

Dimitris Kiritsis, Soumaya El Kadiri, Apostolos Perdikakis, Ana Milicic, Dimitrios Alexandrou, Konstantinos V. Pardalis


Proposal of an Assessment Model for New Product Development.

Monica Rossi, Sergio Terzi, Marco Garetti


Multi-objective Optimization of Product Life-Cycle Costs and Environmental Impacts.

Daniele Cerri, Marco Taisch, Sergio Terzi


A Stochastic Formulation of the Disassembly Line Balancing Problem.

Mohand Lounes Bentaha, Olga Battaïa, Alexandre Dolgui


Incorporating Regularity of Required Workload to the MMSP-W with Serial Workstations and Free Interruption of the Operations.

Joaquín Bautista, Rocío Alfaro, Alberto Cano 0002


Incorporating Ergonomics Factors into the TSALBP.

Joaquín Bautista, Cristina Batalla, Rocío Alfaro


Critical Factors for Successful User-Supplier Integration in the Production System Design Process.

Jessica Bruch, Monica Bellgran


Current State and Future Perspective Research on Lean Remanufacturing - Focusing on the Automotive Industry.

Elzbieta Pawlik, Winifred Ijomah, Jonathan Corney


Understanding Product State Relations within Manufacturing Processes.

Benjamin Knoke, Thorsten Wuest, Klaus-Dieter Thoben


Universal Simulation Model in Witness Software for Verification and Following Optimization of the Handling Equipment.

Jirí Holík, Lenka Landryová


An Adaptive Kanban and Production Capacity Control Mechanism.

Léo Le Pallec Marand, Yo Sakata, Daisuke Hirotani, Katsumi Morikawa, Katsuhiko Takahashi


Intelligent Manufacturing Systems: Controlling Elastic Springback in Bending.

Torgeir Welo


Splitting or Sharing Resources at the Process Level: An Automotive Industry Case Study.

Dag E. Gotteberg Haartveit, Marco Semini, Erlend Alfnes


Optimization of Flexible Assembly Systems for Electrical Motors.

Mirlind Bruqi, Ramë Likaj, Jorgaq Kaqani


Flexible and Reconfigurable Layouts in Complex Manufacturing Systems.

Maria Manuela Azevedo, José António Crispim, Jorge Pinho de Sousa


Cost Management Practices in Collaborative Product Development Processes.

Carlos Barbosa, Paulo Afonso, Manuel Nunes


The Multidisciplinary Virtual Product Development Integrates the Influence of Die Casting Defects in the Mechanical Response.

Nicola Gramegna, Iñigo Loizaga, Susana Berrocal, Franco Bonollo, Giulio Timelli, Stefano Ferraro


Design and Simulation-Based Testing of a Prediction Market System Using SIPS for Demand Forecasting.

Hajime Mizuyama


Multi-objective Genetic Algorithm for Real-World Mobile Robot Scheduling Problem.

Quang-Vinh Dang, Izabela Nielsen, Kenn Steger-Jensen


Multi-camera 3D Object Reconstruction for Industrial Automation.

Malamati Bitzidou, Dimitrios Chrysostomou, Antonios Gasteratos


Multimodal Processes Rescheduling.

Grzegorz Bocewicz, Zbigniew A. Banaszak, Peter Nielsen, Quang-Vinh Dang


Novel Automated Production System for the Footwear Industry.

Silvio Cocuzza, Rosanna Fornasiero, Stefano Debei


Safety-Guided Design Concerning Standardization's Requirements of Mowing Robots.

Spyridon G. Mouroutsos, Eleftheria Mitka


Human Factors, Learning and Innovation

Applying Serious Games in Lean Manufacturing Training.

M. Messaadia, Ahmed Bufardi, Julien Le Duigou, Hadrien Szigeti, Benoît Eynard, Dimitris Kiritsis


Flow and Physical Objects in Experiential Learning for Industrial Engineering Education.

David Jentsch, Ralph Riedel, Egon Müller


Context Aware E-Support in E-Maintenance.

Nikos Papathanasiou, Christos Emmanouilidis, Petros Pistofidis, Dimitris Karampatzakis


Using Behavioral Indicators to Assess Competences in a Sustainable Manufacturing Learning Scenario.

Heiko Duin, Gregor Cerinsek, Manuel Oliveira, Michael Bedek, Slavko Dolinsek


Lean Product Development: Serious Game and Evaluation of the Learning Outcomes.

Endris Kerga, Armin Akaberi, Marco Taisch, Monica Rossi, Sergio Terzi


Learning PLM System with a Serious Game.

Philippe Pernelle, Stephane Talbot, Thibault Carron, Jean-Charles Marty


Beware of the Robot: A Highly Interactive and Immersive Virtual Reality Training Application in Robotic Manufacturing Systems.

Elias Matsas, Dimitrios Batras, George-Christopher Vosniakos


Educational Framework of Product Lifecycle Management Issues for Master and PhD Study Programmes.

Milan Edl


The Use of Serious Games in the Education of Engineers.

Jannicke Madeleine Baalsrud Hauge, Borzoo Pourabdollahian, Johann c. k. h. Riedel


Integrating Competence Management into a Coupled Project-System Design Management.

Arz Wehbe, Christophe Merlo, Véronique Pilnière


Model of Skills Development at the Operational Level Applied to the Steel Industry.

Ulysses Martins Moreira Filho, Pedro Luiz de Oliveira Costa Neto


Success Factors for PDCA as Continuous Improvement Method in Product Development.

Eirin Lodgaard, Inger Gamme, Knut Einar Aasland


Supporting Production System Development through the Obeya Concept.

Siavash Javadi, Sasha Shahbazi, Mats Jackson


Measurement, Classification and Evaluation of the Innovation Process and the Identification of Indicators in Relation to the Performance Assessment of Company's Innovation Zones.

Peter Kubicko, Lenka Landryová, Roman Mihal, Iveta Zolotová


The Internet of Experiences - Towards an Experience-Centred Innovation Approach.

Stefan Wellsandt, Thorsten Wuest, Christopher Durugbo, Klaus-Dieter Thoben


Innovating a Business Model for Services with Storytelling.

Morten Lund


Business Strategy and Innovativeness: Results from an Empirical Study.

Gündüz Ulusoy, Gürhan Günday, Kemal Kilic, Lütfihak Alpkan


International R&D and Manufacturing Networks: Dynamism, Structure and Absorptive Capacity.

Patricia Deflorin, Maike Scherrer-Rathje, Helmut Dietl


Building a Conceptual Model for Analyzing Sustainability Projects Aiming at Technology Transfer: A Terminological Approach.

Deise Rocha Martins dos Santos Oliveira, Irenilza de Alencar Nääs, Ivo Pierozzi Júnior, Oduvaldo Vendrametto


Finding Optimal Resources for IT Services.

Sumit Raut, Muralidharan Somasundaram


Development of Engineering Competencies in Brazil and Innovation Policies, an Overview of the Automotive Sector.

Renato Perrotta, Oduvaldo Vendrametto


Holistic Vision of Sustainability in the Production Chain in Oil Exploration Pre-Salt Layer.

Alessandro Luiz da Silva, Mônica Franchi Carniello, José Luís Gomes da Silva


Applicability of Risk Process in Software Projects in Accordance with ISO 31.000: 2009.

Marcelo Nogueira, Ricardo Jorge Machado